Posted on

How Do You Finish your Wood?

The two questions I am most often asked when I am at a show and people look at my items are, “How do you finish your wood?” or “What do you use to finish your wood?” They usually ask about my pens.

Over time I have used several types of finish and experimented with a few others, but I have settled on a specific type.

Before any finishing product hits the wood…

The finishing process begins way before any drop of liquid comes into contact with the wood. I don’t remember where I heard this but the words ring true in my head anytime I am working with a piece of wood.

Your finish only looks as good as your sanding

This makes a huge impact on how your finished piece turns out visually. If your wood is roughly sanded, and there are sand lines through the wood, no amount of finish is going to make that look good.

I sand at a slow speed with the lathe running around 500 rpm’s. This allows no heat to build up and to not have the sandpaper load. Generally I start out with a 220 grit paper and work my way up to 1200 grit sandpaper. This gives the wood a soft silky feel. Also between grits I reverse the lathe and sand with the grain to remove and sanding lines.

Once I am done sanding, I use a soft cloth I to wipe the wood down with Denatured Alcohol (DA) to remove any dust prior to applying the finish. DA cleans the woods and dries quickly without penetrating the wood like water can.

My homemade sandpaper dispenser
My homemade sandpaper dispenser

What about wood stains?

Wood stain is something I don’t use right now. As I tend to work with either exotic or reclaimed/recycled wood I want the natural grain and beauty of the wood to come through. Wood stains can mask that.

Exotic woods like Bocote, Cocobolo, Olivewood, etc. have their own beauty which would be a shame to hide behind a wood stain. My personal opinion is not to hide what nature created.

As for the reclaimed and recycled wood, when I begin turning it, it’s like unwrapping a present. You never know what you are going to find inside until you start peeling back the layers. I have begun turning what looked to be a bland piece of wood but once I began I uncovered hidden inclusions, wood knots, and some gorgeous grain patterns.

When working with wood, it’s like uncovering hidden treasure.

When it’s time to finish the wood…

As I said before I have played around with several types of finishes especially with my pens. From Friction polish, which is commonly a combination of Shellac, Denatured Alcohol, and Boiled Linseed oil, to various paste wax finishes and even Walnut Oil finish. While they are nice, they weren’t quite what I wanted as a finish especially with the pens.

The finish I ended up using and sticking with for my pens is Cyanoacrylate glue which is more commonly known as Super Glue. It creates a hard and durable coating that allows the beauty of the wood to come through while giving it a high gloss shine.

Even with this I have tried several different types and my CA of choice is Titebond. This brand has a good working time, dries fairly quickly, and holds up well.

There are two types of CA finish that can go onto the pens. I start out with five coats of thin CA. This soaks into the wood, and as the name implies, it is very thin and has incredible wicking properties. This comes in handy with woods like Zebrawood or Paduak which are naturally open grained and can have small natural voids in the wood that need to be filled.

Once the thin CA is applied, then I move on to Medium CA, which I apply about ten coats of. It builds a hard shell around the pen barrel which not only looks good but creates a protective barrier. Once this is fully dried and hardened, no matter how much you handle your pen, take it in or out of a purse the shine will always be there.

Titebond CA glue for finish or as it is more commonly known as Super Glue
Titebond CA glue for finish or as it is more commonly known as Super Glue

Hands off!

For a while I had a love/hate relationship with CA finish and it frustrated me to no end.

On occasion I would get a what looked to be smoky spots appearing on the blank when I would start polishing them. In order to figure out what was going on I did several things.

  • I bought fresh CA thinking it had gone bad.
  • I tried it with and without accelerator (which cures the CA faster).
  • Thinking it had something to do with the Florida heat and humidity, I tried playing around with applying it at different times of the day.

In the end I was fingered as the culprit.

Between each coat of CA you have to let it dry completely before going on to the next. I touched it with my finger to test the dryness. If it hadn’t dried enough, I would feel the tackiness on my finger.

What I didn’t realize was that when I did this it was also transferring oils from my skin to the finish which would then appear as a smoky spot when I started wet polishing.

So now between coats my new mantra is, “Hands off!”

An example of the smoky spots I would find in the finish from time to time.
An example of the smoky spots I would find in the finish from time to time.

Time to polish and buff…

Once the coats of CA are finished, and it has dried, there are still two more steps before I’m done.

First there is the wet sanding/polishing. For this I use pads called Micro Mesh. They run from 1500 grit up to 12,000 grit.

When the CA dries, it is not always smooth or even. The Micro Mesh pads takes care of that. I soak the pads in water as they have a sponge-like quality. With the lathe running at 500-600 rpm’s I wet-sand the blanks. The trick with these is to keep them wet and not to let the pads dry out.

As you polish with them, a slurry forms. Between each grit, wipe off the slurry with a soft paper towel.

Once I have gone through all the grits with the Micro Mesh, then the blanks come off the lathe and are ready for the buffing wheel. The wheels I use are cotton, and one is coated with Tripoli powder. With the lathe running at about 2700 rpm’s, I buff out the blank on the wheel with the Tripoli powder. Once that’s done, then I move on to the clean cotton wheel.

When it’s done, the blank pops and shines, and it’s then ready to assemble.

Fini

While this process may seem time consuming, it’s well worth the end results. It produces a pen with a luxurious finish that will last a lifetime.

 

Here are a few examples of my pens done with a CA finish.

Posted on

Hidden Beauty of Reclaimed Wood

It was just a bit over a year ago that I added some pieces of recycled/reclaimed Florida Live Oak and Eucalyptus to my wood selection. A lot has happened in that year. From the Oak, I turned some small live edge bowls. With the Eucalyptus, I turned bowls and bowls that are also tea light holders, as well as a few other items like shaving kits and pens. What I thought was just a passing fancy, using what would have been discarded wood, has now turned into a passion.

Reclaimed Eucalyptus wood bowl
Eucalyptus Bowl with tea light candle holder in the center.
Reclaimed Florida Live Oak Natural Edge Bowl
Live edge Florida Live Oak Bowl (Bark retained on the wood)

 

 

 

 

 

 

 

 

Since those early days, I have expanded my search for reclaimed and recycled wood to work with. I call it Urban Harvesting. Wood that is otherwise headed for the dump or even the burn pile is what I seek out. Even wood that has outlived its purpose in one form or another, I look for and seek ways to transform it on my lathe. Random logs and planks that to most would seem unsightly and even ugly are what I find. The only drawback is that my storage space is limited.

 

Currently around my work area I have a number of different species: Florida Red Maple, Sycamore, Slash Pine, Australian Pine, Florida Live Oak, and Eucalyptus. I even have some Northern Birch from my home state of (upstate) New York that had fallen during the winter. And some of my new wood was gathered from Hurricane Irma this past September.

Recalimed wood wating to be used
Various woods in my shop

Inside each piece of wood is a secret waiting to be revealed. It is hidden away beneath the bark just waiting to be exposed.

What makes this wood even more spectacular is that it isn’t perfect. The hidden beauty that lies beneath has flaws and imperfections which add to the character of the finished piece. Yes I could go to a local lumber yard and buy a perfectly milled piece of wood. And it, too, has beauty in it; from the grain, the color, and the texture of the wood. Just like life isn’t always perfect, neither is this wood. From discolorations, inclusions, crotch wood where several branches met in the trunk, to spalting where bacteria in the wood left unusual patterns and grain in the wood.

All this forms to tell the story of years where the rain fell in plenty. It speaks of years when there was little to no rainfall. Winds that blew and did its best to bend branches as the tree battled the elements. It speaks of lightning, heat, freezing temperatures, and insects and disease.

Reclaimed bowl blanks
Portions of the logs cut and ready for the lathe.

Once I put the wood on my lathe and begin turning it, slowly but surely removing the rough exterior, what lies beneath is exposed to the light of day. All the hidden beauty that lies beneath is brought out. As I work with my chisels and the shavings fly and the wood transforms like a butterfly that was once a caterpillar.
There are times I have a clear vision of what I want the wood to be when I am done. Other times the wood seems to have its own idea of how it wants to look.

Regardless of that, in the end what is born of it, is something unique.

I have found a passion in this wood that others would discard. My limitations are only bound at this point to the amount of wood I can store at a time and the size of the wood I can turn on my midi lathe.

 

In these series of pictures you can see the evolution from a rough log and how a portion of the wood becomes two bowls.
Click on the first image to view a full sized gallery.

 

Posted on

The Summer Heat is on in the Shop

It’s summer time here in Florida, and it’s hot, hot, hot, and oh yeah a bit humid to boot.

I’ve tried to not let it slow me down with regards to working in the shop, but I do have to work around the heat. During the month of July I got out early in the morning and worked till around noon. By that time of the day in July, the sun is high in the sky and the heat and humidity hangs from you. From the looks of it, August will be no different so it will be more early morning work in the shop till it gets too hot.

Still I have managed to turn out (no pun intended) some new items. In addition to trying to sneak in some summer turning in the shop, I have also spent some time cleaning and tuning up my lathe and other tools in preparation for fall.

The Eucalyptus by far has been my favorite wood to work with, both the ability to turn it as well as the color and grain of the wood which never ceases to amaze me. The colors of the wood range from a light brown along the outside to a deep reddish brown as you get deeper into the wood. Thus far I’ve been mainly making bowls with the Eucalyptus and even some bowls with candle holders in the center. They have been coming out very nicely.

I do have some of the Eucalyptus set aside that will be cut into spindles for other items such as pens, shaving sets, and even a bottle opener or two.

The Birch has been a pleasure to work with as well, and I have made some of that wood into tea light candle holders. While the Birch is a light colored wood, the spalting (coloring appearing in cut wood as it ages) has brought out some beautiful variations in the grain.

wooden bowls, bowls, candle holders
Eucalyptus bowls and candle holders

Also I have been playing around with making pen blanks. Using colored pencils I have set them into blanks and then turned them into pens. The effect is a splash of polka dots and color on the pens. It’s also another way to recycle something old and turn (pun completely intended) into something new.

Eucalyptus bowl and click pens
Eucalyptus Bowl and Slimline Pro click pens w/ colored pencils

Some planks of Cypress have also made their way into the shop that have been recovered from the local ship yard. I’ve cut a few into pieces that will be made into shallow bowls, and the rest of it is waiting to be cut either into spindles for magic wands and wine bottle toppers. I’ve really taken a liking to working with recovered and reclaimed wood as once you start digging into what looks like a tired old piece of wood you can uncover some hidden beauty.

Cypress planks
Cypress planks
Cypress bowl
Cypress bowl

In between that I have been lining up craft shows for the near future; including the August 4th First Friday in Tarpon Springs. Right on the heels of that I will be at Hippie Fest in Tarpon Springs on August 12th. These are both fun family craft shows with lots of great vendors, food, music, and crafts.

Other events in the Pinellas/Pasco area are also in the works and will be announced here and on my FaceBook page as they get closer.

Even though it has been a hot summer, I’ve been plugging away in the shop and look forward to seeing some of you out at the upcoming shows.

 

Posted on

Enter My Father’s Day Giveaway!

The past month or so has been crazy if my absence from the blog is any indication. I haven’t spent as much time in the shop as I wanted to, either, although I’ve made up for it recently. But one thing that’s been in the works for a few months is happening as planned…

A Father’s Day giveaway!

Check out this beautiful gel pen made of spalted Florida Live Oak. It’s got a twist cap that looks good on either end. The pen cartridge can be replaced once the ink runs out. (We buy ours at Staples.) Make sure you scroll to the bottom of this post and enter to win!

The contest is open to the U.S. and Canada only and runs from 12:00 a.m. on June 1 until 11:59 p.m. on June 13. The winner will be notified on June 14. Prize is valued at $60.00 USD.

Check out these pictures.

This slideshow requires JavaScript.

Enter the giveaway now!

a Rafflecopter giveaway

Posted on

In the Shop: Birch Tealights

As all good things in the shop do, my latest project started with an idea. Could I make candle holders? What would they look like?

For my first few attempts, I’m sticking with tealights, and I’m spending time with the birch I got in December. I love the grain in general, but right now that it’s spalted, I find it more beautiful than before.

With the weather warming up as the Florida summer looms, I’m not sure how much more time I’ll get in the shop to play around with new ideas. For now, I’ll enjoy the outcome of my latest endeavor.

This slideshow requires JavaScript.

This set has a natural edge to it and is meant to look like a couple of mushrooms. Tell me you see it. The other set I’ve done reminds me of upside down flower pots. I’ve got video of me making them – actually, stripping the bark from the birch – but no real pictures yet. I may have to fix that.

I’ve enjoyed making them, but (for now) it’s labor intensive and a set can take me most of the day out in the shop. Of course, that’s a part I enjoy so I’m definitely not complaining.

So that’s what I’m doing in the shop right now. In case you’re curious, yes, a tealight really does fit in the holder.

Posted on

Fiction: Where’s My Theme Song?

“Pop, pop, fizz, fizz, oh what a relief it is!”

No, that’s not right.

“I’d like to teach the world to sing…I’d like to buy the world a…”

Nope. I’m still getting this wrong.

“It’s Miller time!”

Okay, now we’re getting somewhere. The pop. The fizz. That cold sigh as the top releases, and you know you’re about to drink a cold one. That’s what I do. My whole purpose is to make thirsty people, hot people, even (some) desperate people as happy as possible.

I produce the happiest sound ever heard by most adults of a certain age. Not the glug-glug of greedy slurping. Not the clink as the glass slams down on the table. Not even the satisified, “Ahhhhh” after a long swig.

Nope. I have a better job than that. I’m the reason for the satisfying crack when a seal breaks. I’m the reason your hand doesn’t sting. When you’re struggling to make those manly hands work, I get the job done in one smooth move.

Yeah, I’m the best. I know it. It’s not bragging if it’s true.

And when you’re covered in sweat, with a tongue like sandpaper, and clothes sticking to every inch of you, I’m your best friend. You need me. You’re desperate for me. You’d do anything for me.

Wouldn’t you? You know you would. If I’m not around, you can’t have what you want. And I think that deserves it’s own theme song. Something that shows how much you love me, want me, need me.

Maybe something like this…

You know you love me. And why shouldn’t you?

I’m your trusty bottle opener.

Available on Etsy – the bottle opener with an ego bigger than itself but that always gets the job done. It’s not bragging if it’s true, right?

Posted on

3 Types of Reclaimed Wood I Use

I get teased around here for looking for reasons to buy a new tool. (That might be true.) But my last purchase – a chainsaw – was necessary. I’d found a local tree company who hated getting rid of the wood when they cut down trees and were too happy for an eager woodworker to take some off their hands.

Every so often, I load the chainsaw in the back of my RAV 4, grab a tarp, and go find out what they have. So far, I’ve gotten oak and eucalyptus wood with birch brought to me from out of state. I don’t think these are the only reclaimed woods I’ll work with, but they’re a good start.

Florida Oak

Often called Florida Live Oak by the locals, I’ve got a big stack of oak in the shop that I really enjoy using. It’s a nice, solid hardwood that can be difficult to work with because of how hard it is. When you get it going, turned oak makes beautiful pieces. I’ve used it in everything from pens to bowls. By far the most interesting thing about oak, to me, is the interesting bark patterns that show up when I turn natural edge pieces like some of the bowls I’ve made.

Birch Wood

My dad lives in upstate New York and at Christmas time I asked him to bring me any wood he had and couldn’t use. What I received was a huge stack of birch. It’s a cool wood to work with because the color is different from piece to piece, from white to a light tan. Sometimes, you can see the color change in a single piece of wood. Birch is a wet wood which means that when it spalts, new colors are added to the grain which changes the appearance of the wood and adds an extra dimension to it. So far, I’ve made a box and tea lights.

Eucalyptus

Okay, to be honest, I haven’t actually had a chance to use my stash of eucalyptus yet, but I’m looking forward to it. What I find fascinating is that eucalyptus is so diverse. The oil can be used for respiratory problems, in aromatherapy, and as an essential oil that I use in my homemade pre-shave oil (yes, I make that, too). All that makes me wonder, what kind of wood have I got here? I’m really excited to try it because the pieces in my shop have really interesting branching patterns which should translate into unique grain patterns.

I’ve always felt better when I re-use something or find a new use for an old thing rather then throwing it away. Using reclaimed wood lets me take something unwanted, forgotten, and destined for a wood chipper, and turn it into something useful and beautiful. I still love the exotic woods and the acrylics I use, but using reclaimed wood makes me feel good.

Posted on

Find Me At: Tarpon Springs First Friday (My First!)

I think we’ve established that I love my shop. I love turning wood. I love making the things that pop into my head.

My “introvert card” might pulled over this one, but I really like craft shows and fairs, too. I’ve done a few since last fall at the Florida Estates Winery and a new one for Tampa Bay Cat Alliance. My next one isn’t a new event, but it is new to me:

Tarpon Springs First Friday

Vendors line up in downtown Tarpon Springs and people from all over walk through, find something good to eat, get themselves a drink, and hopefully find a gift or a unique item they can’t live without. I’ve been a few times and told myself I wanted to be a part of it as a vendor at some point.

That time has arrived. On Friday, April 7, my little (blue not red) wagon and I will arrive with tables, tableclothes, signs, and my entire inventory to see what the locals think of my woodworking. If it’s like previous shows, I’ll probably have to explain a few things:

No, I don’t work for a manufacturer.

Yes, I made all of these by hand.

Yes, the pens, bottle openers, wine stoppers, and brushes work.

It’s pretty cool to see someone’s eyes light up when they hold something I’ve made, amazed at the wood grain or that a person can actually make such a thing. Of course, when they pull out their wallet to buy something, that’s even better.

Are you a Tampa Bay local? Look for me in downtown Tarpon Springs on April 7, 2017!

Posted on

In the Shop: Taboti Men’s Shaving Set

The rules of polite blogging probably mean you shouldn’t showcase your own work in the exact same way twice in a row, but I can’t help myself.

I’m really proud of this last project.

While I’ve had some extra time in the shop, I worked on all kinds of things: keychains, pens, bowls, and more but the Tamboti Men’s Shaving Set is my absolute favorite. Every piece comes from one block of wood, which means the grain is the same throughout. I did that on purpose to give the set continuity and because I wondered if I could.

Most of what I do in my shop starts from that point. I think, “I wonder if I can…” and then I go out and see if I really can. Sometimes a bowl cracks or the acrylic chips. Sometimes I can fix it, sometimes I can’t. I’ve had my share of small injuries and mishaps – cuts, scrapes, gouges, and a blister that made Michaela cringe every time she saw it. (Maybe I shouldn’t have shoved my finger in her face and said, “Look!” multiple times.)

Anyway, maybe I can be forgiven for showing off again this month. Maybe if you take a look at it, you’ll agree that it’s beautiful, too. Either way, what I see when I look at it is a continuing improvement in my woodworking abilities as well as the outcome of wondering “What if…”

This slideshow requires JavaScript.

Love it and want one for yourself? This set is on Etsy or you can contact me for a custom order.

Posted on

A Story in Pictures: Making My First Box

I don’t think I’ve ever considered myself a creative person. Certainly not an artist. Ever since I began turning wood and making the things that pop into my head, I’ve had to rethink that assessment.

This week I’m off of work and in the shop. An idea came to me, and since I had the time and the wood, I gave it a go.

I started with beautiful birch wood brought down from New York – my dad came at Christmas and loaded his truck for me…

 

I had this picture in my head of what I wanted the finished product to look like. Since it’s a new project, though, there’s no way to really know. But you have to start somewhere…

 

I started with one piece of wood but ended up with two parts. Making sure it matched up was the first step. Then it was time to make the picture in my head match the reality of the wood…

 

For a first try, it’s not bad. But I’m not satisfied. Oh, my fiance tells me its beautiful. Even the kids were impressed that I made a box. The oldest asked if he could have it. I told him no, not this one. Maybe I’ll make him one for his own.

Maybe I’m a “typical” artist (whatever that means) or maybe I just need more practice. I’m proud of it, but it’s not what I saw in my head. Which is plenty of incentive to keep making more…

What do you think? I think I’ll make more and maybe one day I’ll make it exactly as I envision it. But until then, this is a good start.